 |
| Quantity: | |
|---|---|
KIS-4
Chunlai
KIS-4 MAP Packing Tray Sealing Machine is vertical type vacuum and gas-flush
pneumatic tray sealing system,vacuums the tray completely before it inserts
gas. The machine is built in stainless steel for use in hygienic environments. The
system is tooled up to your specific tray size and neatly trims the film around
the perimeter of the tray, the wasted film is then taken up onto the motorized
film feeding system. This machine requires a compressed air connection.
Main Function:
The food trays are manually placed in the tray carrier drawer.As a safety
precaution, the operation is initiated by the two handed release system.
The tray carrier moves automatically into the machine and the machine head
comes down and seals around the tray carrier.
The large capacity vacuum pump efficiently evacuates the chamber and the
gas-flush is carried out.
The sealing head then moves down,completing the perimeter seal around the
tray as well as a neat perimeter cut.
The tray carrier drawer then automatically moves back out to the operator and
the trays may be removed.
While removal and reloading of the trays takes place,the film is automatically
fed to the new position. The new position is determined by either time,blank
film counting
(to calculate the film length of tray for saving the film cost) or by photocell
sensor mark (for printed film).
KIS-4 MAP Packing Tray Sealing Machine is vertical type vacuum and gas-flush
pneumatic tray sealing system,vacuums the tray completely before it inserts
gas. The machine is built in stainless steel for use in hygienic environments. The
system is tooled up to your specific tray size and neatly trims the film around
the perimeter of the tray, the wasted film is then taken up onto the motorized
film feeding system. This machine requires a compressed air connection.
Main Function:
The food trays are manually placed in the tray carrier drawer.As a safety
precaution, the operation is initiated by the two handed release system.
The tray carrier moves automatically into the machine and the machine head
comes down and seals around the tray carrier.
The large capacity vacuum pump efficiently evacuates the chamber and the
gas-flush is carried out.
The sealing head then moves down,completing the perimeter seal around the
tray as well as a neat perimeter cut.
The tray carrier drawer then automatically moves back out to the operator and
the trays may be removed.
While removal and reloading of the trays takes place,the film is automatically
fed to the new position. The new position is determined by either time,blank
film counting
(to calculate the film length of tray for saving the film cost) or by photocell
sensor mark (for printed film).
